Working Principle:
For ZHX series combined flow type evaporative condenser, the coil will soaked fully by spraying water when process fluid flows inside, meanwhile, the heat of working fluid will be transferred by wall of coil tube, and become saturated wet-hot vapor after mixed with water and air, then it will be discharged into atmosphere by fan, but water will be collected into water basin by drift eliminate for recycled spraying, low water consumption. The spraying water temperature wil be reduced by PVC infill during the recycling, and it flows in same direction to fresh air, to cool coil mainly b sensible heat conduction way.
Evaporative Condenser is widely used in energy chemical industry,Pharmaceuticals coal,Electricity,industrual refrigeration,beer,beverage,food processing,the cold storage,the building air conditioning refrigeration,etc.
The food industry
* Poultry Slaughtering Plant
* Multi-purpose cold storage
* Beer and beverage industry
* Industrial ice/Skating Rink
* Ice cream factory
* Fish processing industry
Chemical medicine
* Inter-cooling of methanol/methanol synthetic ammonia compressor
* Methanol distillation process cooling condensation
* Gas cooling of natural gas or coke gas exchange process
* Purification process as weoo as cooling condensation
* Steam condensation of turbine
* Ethyl acetatae condensation
MAIN ACCESSORIES
* Heat Excahnge Coil is made by top quality steel pipe. Usaully is stainless steel and galvanized steel.Till now, the biggest operating pressure of coil we designed reach to 30mpa, far morethan the competutors level.
* Special axial flow type fan, with forward tilting blades and streamline cylinder, direct driven no belt. All motors are Siemens or WEG brand, has advantages of compact size, light weightm good start performance, durable and reliable abilities.
Compared with same level centrifugal fan system, axial flow type need half motor power only, effectively saves energy.
* The spraying water pump designed with high-quality non-steering restricted mechanical seal, no leakage and long lifespan. Adopt Siemens or WEG brand special outdoor type motors and equiped with imported bearings, which could guarantee its long-term operation, low noise, and high performance.
* Cross flow type honeycomb PVC infill, special designed with distinctive big surface area air channel where spraying water flow as a big water film and enlarge water flow time inside of infill, to extend the water cooling effect. And have advantaged of small drag coefficient, anti-aging, no easy to deformation.
Advatages:
* Excellent Heat Exchange Performance
Parallel air and water path as well as the combination of coils and PVC fill, this effectively avoid the dry spot and scale formation, and imprive the heat exchange performance.
* Convenient Maintenance
Huge maintenance spacemakes it convenient to inspect the priduct. Techniciancs can enter the cooling tower during operation time.
* Convenient Transportation and Installation
The Evaporative condenser is designed to be standard upper body part and bottom body oart, making it is able to be shipped separately and saves transporation and installation cost.
* Slop Water Basin Desigh
Suspended PVC fill and sloped water basin floor toward the drain facilitate cleaning.
MODEL |
CAPACITY(M3/h) |
FAN |
WATER SPRAYING PUMP |
INLET/OUTLET DN(MM) |
WEIGHT |
DIMENSION |
QTY&POWER (KW) |
AIR VOLUME PER SET (M3/h) |
QTY |
WATER VOLUME PER SET (M3/h) |
DN(mm) |
SHIPPING(KG) |
OPERATIONG(KG) |
LENGTH(MM) |
WIDTH(MM) |
HEIGHT(MM) |
| ZHX-320 |
320 |
1*3 |
35000 |
1*1.1 |
36 |
DN80 |
2390 |
3790 |
1925 |
2380 |
4220 |
| ZHX-430 |
430 |
1*4 |
45000 |
1*1.1 |
45 |
DN100 |
2510 |
3910 |
1925 |
2380 |
4220 |
| ZHX-525 |
525 |
1*5.5 |
65000 |
1*1.1 |
45 |
DN100 |
2760 |
4340 |
1925 |
2580 |
4220 |
| ZHX-595 |
595 |
1*5.5 |
75000 |
1*1.5 |
65 |
DN100 |
3290 |
5140 |
1925 |
2900 |
4220 |
| ZHX-700 |
700 |
1*7.5 |
87000 |
1*1.5 |
65 |
DN100 |
3680 |
5530 |
1925 |
2900 |
4965 |
| ZHX-800 |
800 |
2*4 |
45000 |
1*2.2 |
84 |
DN100 |
4230 |
7650 |
3770 |
2200 |
4220 |
| ZHX-870 |
870 |
2*4 |
45000 |
1*2.2 |
84 |
DN125 |
4510 |
7930 |
3770 |
2200 |
4720 |
| ZHX-980 |
980 |
2*4 |
45000 |
1*2.2 |
84 |
DN125 |
4620 |
8040 |
3770 |
2200 |
4965 |
| ZHX-1100 |
1100 |
3*3 |
40000 |
1*3 |
120 |
DN125 |
6170 |
10170 |
4240 |
2200 |
4720 |
| ZHX-1250 |
1250 |
3*4 |
45000 |
1*3 |
120 |
2-DN100 |
6510 |
10510 |
4240 |
2200 |
4965 |
| ZHX-1380 |
1380 |
4*3 |
45000 |
1*3 |
120 |
2-DN100 |
7100 |
11950 |
5610 |
2200 |
4220 |
| ZHX-1520 |
1520 |
4*3 |
40000 |
1*3 |
120 |
2-DN100 |
7310 |
12160 |
5610 |
2200 |
4730 |
| ZHX-1680 |
1680 |
4*4 |
45000 |
1*3 |
120 |
2-DN100 |
7590 |
12440 |
5610 |
2200 |
4965 |
| ZHX-1840 |
1840 |
4*4 |
45000 |
1*4 |
170 |
2-DN125 |
8920 |
15580 |
7450 |
2200 |
4220 |
| ZHX-2010 |
2010 |
4*4 |
45000 |
1*5.5 |
230 |
2-DN125 |
9330 |
15990 |
7450 |
2200 |
4720 |
| ZHX-2245 |
2245 |
4*4 |
45000 |
1*5.5 |
230 |
2-DN125 |
9550 |
16210 |
7450 |
2200 |
4965 |
| ZHX-2450 |
2450 |
5*4 |
45000 |
1*5.5 |
230 |
4-DN100 |
11650 |
19090 |
9300 |
2200 |
4720 |
| ZHX-2600 |
2680 |
5*4 |
45000 |
1*5.5 |
230 |
4-DN100 |
12350 |
19790 |
9300 |
2200 |
4965 |
| ZHX-2820 |
2820 |
6*4 |
45000 |
1*5.5 |
230 |
4-DN100 |
12490 |
19930 |
9300 |
2200 |
4965 |
FAQ
Q1. What's your Main Product ?
The company's main products are Closed circuit cooling tower and Evaporative condenser and Coolingtowerparts such as Film Fill, drift eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,FRP gratings, Fan stack, band & clamp, etc
Q2. Do you keep the stock of your products?
A: Yes, we maintain a certain amount of standard products inventory, in time to meet your needs.
Q3. Whether you have the ability to accept the product customization?
A: Products can be customized, we can make the new thermoforming or extruding mode based on your drawings and we can sign a confidentiality agreement about your patented product, pls contact us for any further information.
Q4: What's your delivery time ?
The delivery time normally will be 30 -60days , the specified delivery date will be according to customer request and order quantity .
Q5. How to reassure those who doubt the product quality and actual situations?
A professional system can ensure the whole latest development which will be monitored by you through the reports in the diffferent stages.
Q6.How about your after sale service?
1. Warranty service
a).Warranty: 18 months.
b) .Warranty starting: acceptance date.
2. Service commitment
Warranty period:
a). Our company will be responsible for the quality problems arising from the maintenance, replacement of parts and related materials.
b). Artificial damage will be repaired by our company, but the damaged devices shall be paid.
3. Expiration of the warranty period:
a). Our company provides lifelong maintenance, but the user is responsible for the cost of labor and material.
b). Our company also provides charging upgrades and improvements following to the customer's requirements.
){kind=link}