China Evaporative Condenser R404A Industrial Heat Exchanger Equipment

Product Description

China Evaporative Condenser R404A Industrial Heat Exchanger Equipment

Product Description

 

Working Principle:

For ZHX series combined flow type evaporative condenser, the coil will soaked fully by spraying water when process fluid flows inside, meanwhile, the heat of working fluid will be transferred by wall of coil tube, and become saturated wet-hot vapor after mixed with water and air, then it will be discharged into atmosphere by fan, but water will be collected into water basin by drift eliminate for recycled spraying, low water consumption. The spraying water temperature wil be reduced by PVC infill during the recycling, and it flows in same direction to fresh air, to cool coil mainly b sensible heat conduction way.

Evaporative Condenser is widely used in energy chemical industry,Pharmaceuticals coal,Electricity,industrual refrigeration,beer,beverage,food processing,the cold storage,the building air conditioning refrigeration,etc.
The food industry
* Poultry Slaughtering Plant
* Multi-purpose cold storage
* Beer and beverage industry
* Industrial ice/Skating Rink
* Ice cream factory
* Fish processing industry
Chemical medicine
* Inter-cooling of methanol/methanol synthetic ammonia compressor
* Methanol distillation process cooling condensation
* Gas cooling of natural gas or coke gas exchange process
* Purification process as weoo as cooling condensation
* Steam condensation of turbine
* Ethyl acetatae condensation


MAIN ACCESSORIES
* Heat Excahnge Coil is made by top quality steel pipe. Usaully is stainless steel and galvanized steel.Till now, the biggest operating pressure of coil we designed reach to 30Mpa, far morethan the competutors level.

* Special axial flow type fan, with forward tilting blades and streamline cylinder, direct driven no belt. All motors are Siemens or WEG brand, has advantages of compact size, light weightm good start performance, durable and reliable abilities.
Compared with same level centrifugal fan system, axial flow type need half motor power only, effectively saves energy.
We can also offer EC and Explosion proof motor.


* The spraying water pump designed with high-quality non-steering restricted mechanical seal, no leakage and long lifespan. Adopt Siemens or WEG brand special outdoor type motors and equiped with imported bearings, which could guarantee its long-term operation, low noise, and high performance.


* Cross flow type honeycomb PVC infill, special designed with distinctive big surface area air channel where spraying water flow as a big water film and enlarge water flow time inside of infill, to extend the water cooling effect. And have advantaged of small drag coefficient, anti-aging, no easy to deformation.

Advatages:
* Excellent Heat Exchange Performance
Parallel air and water path as well as the combination of coils and PVC fill, this effectively avoid the dry spot and scale formation, and imprive the heat exchange performance.
* Convenient Maintenance
Huge maintenance spacemakes it convenient to inspect the priduct. Techniciancs can enter the cooling tower during operation time.
* Convenient Transportation and Installation
The Evaporative condenser is designed to be standard upper body part and bottom body oart, making it is able to be shipped separately and saves transporation and installation cost.
* Slop Water Basin Desigh
Suspended PVC fill and sloped water basin floor toward the drain facilitate cleaning.

 

MODEL	CAPACITY(M3/h)	FAN		WATER SPRAYING PUMP		INLET/OUTLET DN(MM)	WEIGHT		DIMENSION
		QTY&POWER (KW)	AIR VOLUME PER SET (M3/h)	QTY	WATER VOLUME PER SET (M3/h)	DN(mm)	SHIPPING(KG)	OPERATIONG(KG)	LENGTH(MM)	WIDTH(MM)	HEIGHT(MM)
ZHX-320	320	1*3	35000	1*1.1	36	DN80	2390	3790	1925	2380	4220
ZHX-430	430	1*4	45000	1*1.1	45	DN100	2510	3910	1925	2380	4220
ZHX-525	525	1*5.5	65000	1*1.1	45	DN100	2760	4340	1925	2580	4220
ZHX-595	595	1*5.5	75000	1*1.5	65	DN100	3290	5140	1925	2900	4220
ZHX-700	700	1*7.5	87000	1*1.5	65	DN100	3680	5530	1925	2900	4965
ZHX-800	800	2*4	45000	1*2.2	84	DN100	4230	7650	3770	2200	4220
ZHX-870	870	2*4	45000	1*2.2	84	DN125	4510	7930	3770	2200	4720
ZHX-980	980	2*4	45000	1*2.2	84	DN125	4620	8040	3770	2200	4965
ZHX-1100	1100	3*3	40000	1*3	120	DN125	6170	10170	4240	2200	4720
ZHX-1250	1250	3*4	45000	1*3	120	2-DN100	6510	10510	4240	2200	4965
ZHX-1380	1380	4*3	45000	1*3	120	2-DN100	7100	11950	5610	2200	4220
ZHX-1520	1520	4*3	40000	1*3	120	2-DN100	7310	12160	5610	2200	4730
ZHX-1680	1680	4*4	45000	1*3	120	2-DN100	7590	12440	5610	2200	4965
ZHX-1840	1840	4*4	45000	1*4	170	2-DN125	8920	15580	7450	2200	4220
ZHX-2010	2010	4*4	45000	1*5.5	230	2-DN125	9330	15990	7450	2200	4720
ZHX-2245	2245	4*4	45000	1*5.5	230	2-DN125	9550	16210	7450	2200	4965
ZHX-2450	2450	5*4	45000	1*5.5	230	4-DN100	11650	19090	9300	2200	4720
ZHX-2600	2680	5*4	45000	1*5.5	230	4-DN100	12350	19790	9300	2200	4965
ZHX-2820	2820	6*4	45000	1*5.5	230	4-DN100	12490	19930	9300	2200	4965

FAQ
 
Q1. What's your Main Product ?

The company's main products are Closed circuit cooling tower and Evaporative condenser and Cooling tower parts such as Film Fill, drift  eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,
FRP gratings, Fan stack, band & clamp, etc

Q2. Do you keep the stock of your products?
A: Yes, we maintain a certain amount of standard products inventory, in time to meet your needs.

Q3. Whether you have the ability to accept the product customization?
A: Products can be customized, we can make the new thermoforming or extruding mode based on your drawings and we can sign a confidentiality agreement about your patented product, pls contact us for any further information.

Q4: What's your delivery time ?
The delivery time normally will be 30 -60days , the specified delivery date will be according to customer request and order quantity .

Q5. How to reassure those who doubt the product quality and actual situations?
A professional system can ensure the whole latest development which will be monitored by you through the reports in the diffferent stages.

Q6.How about your after sale service?  
1. Warranty service
a).Warranty: 18 months.
b) .Warranty starting: acceptance date.  
2. Service commitment
Warranty period:
a). Our company will be responsible for the quality problems arising from the maintenance, replacement of parts and related materials.
b). Artificial damage will be repaired by our company, but the damaged devices shall be paid.
3. Expiration of the warranty period:
a). Our company provides lifelong maintenance, but the user is responsible for the cost of labor and material.
b). Our company also provides charging upgrades and improvements following to the customer's requirements.