Commercial and Industrial Anti-Corrosion Closed Circuit Cooling Tower for Commercial HVAC

• Customization: Available
• After-sales Service: Yes
• Warranty: 2 Years
• Model NO.: BHX-150
• Cooling Method: Counter Flow
• Ventilation Mode: Natural Ventilation
• Material: Carbon Steel Hot DIP Galvanized Plastic Spraying
• Air Contact Form: Wet
• Air Contact Way: Closed
• Tower Shape: Square
• Noise Level: Low
• Application Fields: Industrial
• Certification: ISO, CE, CTI
• Condition: New
• Material of Cooling Coils: SS304/SS316L,Carbon Steel Hot DIP Galvanized
• Capacity: 100-1000rt
• Pump: Vertical, Centrifugal
• Application Areas: Oil Refineries Chemical Processing Steel Manuf
• Product Name: Combined Flow Closed Circuit Cooling Tower
• Character: Energy Saving and Easy Maintainance
• Key Selling Points: Sustainable, Low Operation and Maintain Cost
• Dimension(L*W*H): Custom Design Production
• Coil Tube Thickness: 0.8/1.0/1.2mm
• MOQ: 1set
• Design Pressure: 1.0MPa
• Delivery Date: 40 Days to 60 Days
• Drift: Less 0.002%
• Platform for Maintenance: Optional
• Fan: Siemens Weg or China Brand
• Transport Package: Container
• Specification: 5610*2200*4730
• Trademark: HACST
• Origin: China
• Production Capacity: 2000sets/Years
• Package Size: 6000.00cm * 3000.00cm * 5000.00cm
• Package Gross Weight: 2000.000kg

Product Description

Commercial and Industrial Anti-Corrosion  Closed Circuit Cooling Tower for Commercial HVAC

Advantages of the Combined Flow Closed Circuit Cooling Tower:energy saving and efficient heat exchange
 

Product Description

 1.Excellent heat exchange performance

The technology combining PVC packing and coil is adopted to prevent dry spots and structural phenomena in the coil, ensuring that the coil will not be in a state of water shortage

2. Easy maintenance

The cooling tower is designed with an inspection door and a repair ladder. It is easy for technicians to check the working condition of the cooling tower. Technicians can enter the cooling tower during operating hours

3.Easy to transport and install

The design of the cooling tower is divided into an upper box and a lower box, which is convenient for transportation and installation of the cooling tower

PRODUCT DETAILS

1.Heat Exchange Coil

The Heat Exchange Coil is made of high-quality steel tubes.

There are red copper tubes, SS304,SS316L hot-dip galvanized steel pipes and carbon steel pipes available for selection
2.Fan

Fan adopts the dedicated motor of the international brand Siemens WEG
3.Spraying Pump

Spraying Pump uses special outdoor motors of brands such as Siemens WEG
4.PVC Fills

PVC Fills have the advantages of low wind resistance coefficient, anti-aging and not easy to deform

Working Principle

The process fluid to be cooled is circulated within a serpentine cooling coil, which is continually wetted on the outside by the spraying water system. The heat is transferred by the wall of coil, becomes saturated steam when it meets spray water and air. Then the heat will be discharged into atmosphere by fan, but water will be collected in the basin by drift eliminator for recirculated spraying. The temperature of spraying water is reduced by PVC fill. spraying water flows in the same direction as the fresh air, to cool coil mainly by significant heat conduction way, which is especially suitable to the cases when cooling tower outlet temperature is much closer to the wet bulb temperature.

Project

Cooling towers are widely used in chillers, induction cooling, jacket cooling, water source heat pumps,

compressor jacket cooling, etc.CLOSED COOLING TOWER&EVAPORATIVE CONDENSER PROJECTS.Our closed cooling tower &evaporative condenser have good working in India, Australia,Paraguay,Pakistan,Thailand,Myanmar,Cambodia,Malaysia,Greece,
USA,Haidi,Vietnam,Greece,Chile,Peru,Colombia,Mexico,UAE,Uzbekistan,Saudi Arabia,ect

Packaging & Shipping

The industrial closed cooling tower can be shipped in two separate components: the upper section and the lower section. This two-part design allows for easy on-site assembly on your end.

Certifications

Our products are widely used all over the world, including South America, North America, Southeast Asia, Oceania, Europe, etc., and enjoy a good reputation among customers. We have passed ISO9001, ISO/TS16949, ISO14001, CE,CTI, TUV and BV certifications.

Other Products
If you need to replace other products or related accessories, please contact us at any time. We can provide it for you

FAQ

 

Q: Your company is a manufacture or trading company?	A: We have been one of the largest leading cooling tower ,evaporative condenser and adiabatic cooler manufacturer since the year of 1975 with the "famous brand"-Heng An manufacture in China.
Q: How do I get repair parts and how long does it take?	A: We have workshop can supply all parts of the product, and 90% of spare parts can be distributed to any place in the world within one week!
Q: What if I don't have the professional engineer to install or maintain the product?	We could send experience engineers on site to install the product and train your staff for equipment operation and maintenance.