| After-sales Service: | Customed Service |
|---|---|
| Warranty: | 1 Year |
| Cooling Method: | Cross Flow |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 100 Ton FRP Square Cross Flow Cooling Tower
The square cross-flow open cooling tower is widely used in various industries and commercial sectors, particularly in the following areas:
1.Power generation: It is used as a cooling apparatus in power plants. It helps in cooling down the hot water from the power plant's cooling cycle to maintain a stable operating temperature.
2.Petrochemical industry: It is extensively employed in refineries, chemical plants, and petrochemical facilities. These facilities require cooling of the high-temperature heat generated during the production processes.
3.Manufacturing: The square cross-flow open cooling tower is also widely used in industries such as steel, metallurgy, automotive, textile, and paper. It helps in regulating temperatures during manufacturing processes.
4.Cold storage and refrigeration equipment: It is used for cooling the coolant or refrigerant in cold storages and refrigeration equipment to maintain stable low temperatures.
5.HVAC systems: It is employed in building HVAC (Heating, Ventilation, and Air Conditioning) systems to regulate the temperature of indoor air.
The square cross-flow open cooling tower is preferred in many sectors due to its efficiency, energy-saving capabilities, cost-effectiveness, and easy maintenance.
01 GENERAL DESCRIPTION
FRP Casing cross flow open cooling towers have exceptional anti-corrosion performance, widely applicable in HVAC system, petrochemical industries. With extremely low initial input.Our FRP Open towers designed with HDG steel or Stainless Steel Structure , solid and firm.Single cell water flow rate: 20-1000 m³/h.
| Model | Media | Capacity | Dimension(mm) |
| FKH-100 | Water | 100 m3/h | 2220*3750*3340 |
02 WORKING PRINCIPLE
1. Working fluid (water, oil or other flowing liquid) flowing inside of the coils, which is enwrapped by the cooling tower spray water on the outside. The heat of working fluid is transferred by the coil and become the saturated vapor when meeting the water and air.
2. The heat is exhausted out of the cooling tower by the cooling tower by the top fan; water is collected back to the bottom tank and circulates continuously. The cooling tower spray water is cooled down via cooling tower PVC fill in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.3. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high-temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).
04 OUR ADVANTAGE
1. Space saving and lightweight struciure
The high efficiency heat exchange packing specially designed for this series of cooling towers has greatlyimproved the heat exchange area. Compared with the original dbh series and the original cdbhz series, thefloor area of the packing is greatly reduced, which is superior to the optimization of structural design and theuse of light steel structure, and the operation weight is also greatly reduced.
2. Save power
The packing with small ventilation resistance and wing type FRP high-efficiency fan specially designedfor cooling tower by Tsinghua University are used to reduce the motor power used, and the motor power usedfor ultra-low noise type is smaller and more power saving. According to the users requirements, it can also beequipped with two speed motor to save electricit.
3. Low operation noise
The wing type axial-flow fan made of FRP material and the low noise motor designed for the coolingtower by Tsinghua University are used to reduce the running noise of the cooling tower. The operation noiseof ultra-low noise series cooling tower is lower, which fully meets the environmental protection requirements. If equipped with a two speed motor, it can reduce the low noise by another 2-3db(a)at low speed at night.Users need to put forward separate requirements for two speed motors when ordering.
4. Good corrosion resistance
The tower body, water tank and panel are made of FRP with good corrosion resistance, and lightstabilizer is added in the gel coat resin, which has good anti-aging performance and is durable. The steelstructure parts of the tower body are galvanized after processing to improve the corrosion resistance of thecooling tower. in the normal service life, no additional corrosion protection is required
5. Convenient combination
The combination mode can be adopted to meet the requirements of different working conditions. Theuser can also decide the combination according to the site conditions, and adjust the appearance of thecooling tower according to the building characteristics of the user. If the users site is very limited, the fourthdesign and Research Institute of the Ministry of mechanical industry can also design according to the specialrequirements of the user to meet the users requirements for thermal performance and noise.
05 RELEVANT COOLING TOWER
06 PACKING &SHIPPING
1) Standardized modular design, two body parts: upper body part and bottom body part;
2) Shipped by one 20ft/40ft container,upper and bottom body parts shipped assembly and separately;
3) Bottom body parts, will packed with plastic film to anti moisture, shipped assembly;
4) Upper body parts, will packed with plastic film to anti moisture, shipped assembly.
06 OUR SERVICE
Pre-Sale Service
* Professional Technical and Sales Service Team
* Techncial Proposal, CAD Drawings available
* Welcome to View Our Factory.
After-Sale Service
* Training how to install, operate, and maintaining the equipment.
* Engineers available to service machinery overseas.
07 FAQ
(1)Your company is a manufacture or trading company?
We are a leading cooling tower manufacturer with 38 years producing experience. The famous brand-"Heng An" is well known not only China but all over the world. The company is a large group company loacted in Weifang Citey of China.
(2) What is your Minimum Order Quantity(MOQ)?
MOQ is 1set. Because our business for both wholesale and retail clients.
(3) How do I get repair parts and how long does it take?
Complete Parts Workshop, and can supply all parts, 90% of Spare parts can be distributed to any place on the world within one week
HACST is a leading global manufacturer of cooling towers, evaporative condensers and air-cooled heat exchangers providing full-service cooling solutions and support to customers in the heating, industrial, refrigeration and process cooling markets for 45 years.
The company's main products include open and closed circuit cooling tower, evaporative condenser, air cooled heat exchanger, nano fluid heat exchanger, etc. Products are widely used in petroleum, chemical industry, pharmaceutical, coal, electric power, steel and other fields.
After more than ten years of hard work, we have a mature and stable cooperative customer base in many countries around the world. Products have been exported to more than 60 countries and regions including the United States, Russia, Germany, France, Belgium, Australia, Latin America, the United Arab Emirates, Saudi Arabia, Pakistan, India, and Southeast Asia.The company has upgraded from standardized products to the most complex customized products, tailor-made according to the specific requirements of customers, and provide the best design solutions. The company has a sound quality management system, strict manufacturing process, perfect testing methods and after-sales service system. The company has successively passed ISO9001 quality management, ISO14001 environmental management, OHSAS18001 occupational health and safety management and other system certifications, production license for Class D pressure vessels. It has a number of inventions and patents. The company's products have passed international testing organizations: CTI, Australian AS1210 Pressure Vessel Certification, German TUV company, French BV company, and Europe CE certification. Product quality and service are highly recognized and praised by domestic and foreign customers.
Vision: Manufacturing leading products, striving for the world's leading brand!
Value :Integrity. Innovation. Sustainability
Mission:Manufacturing Quality Products, Pursuit of Excellence, Contributing to Society!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}